High dielectric footwear, with seamless Nylon fibre upper. Equipped with
glass fiber toecap and composite midsole with a constant thickness of 4
mm. The EVA/RUBBER sole has a highly expanded EVA inter-sole, antishock power, which makes the shoe more flexible and lightweight. The
nitrile rubber outsole guarantees perfect grip on both dry and wet
surfaces. The footbed is made of two-component material with a shell in
polyurethane foam and memory PU with variable thickness: 4 mm at the
front and 9 mm in the heel area. Remarkable anti-shock properties. The
3D-TEX polyester lining reduces the sweating effect.
Main features:
– Extremely light, breathable and comfortable.
– Seamless upper for better foot grip, tear and abrasion resistant
– High Durability Cap System: High durability TPU tip system
– T-FLEX” composite sheet with a constant thickness of 4 mm
– TPU rear support to optimize stability in the heel area
– Ergonomic and ultra-flexible eva/rubber outsole that guarantees a high
level of comfort
– Suitable for clean environments, characterized by soils with low degree
of roughness.
Crossing current: 0.7 mA (with fixed voltage of 18,000V)
. The shoe has been tested at a voltage of 18,000 V at 60 Hz for a
minute, as prescribed by the American standard ASTM F2413-11.
The measured current passage (equal to 0.7 mA) was lower than the limit
maximum of 1,0 mA prescribed by the above standard.
From the above it can be stated that footwear protects
the user from a maximum voltage of 18,000 V for 1 minute. The test
was carried out in dry conditions, as prescribed by the standard
American ASTM F2413-11. This type of footwear will not carry out
their function if they are worn and used in damp environments. The
electrical resistance of this type of footwear can be changed to
significant degree of contamination of the constituent material of the
soles or ambient humidity.