Worldwide! Freight cost only exclude duties/taxes
PRODUCTS ARE AVAILABLE AT DURASAFE INTERNATIONAL STORES IN SINGAPORE | VIETNAM | THAILAND | INDONESIA | CHINA | PHILIPPINES | MALAYSIA | HONG KONG | TAIWAN
ARMOUR X3 9-Inch Side Zip S3 SRC Composite Toe Cap Safety Boot Kevlar Midsole Black Size 5 to 13
ARMOUR X3 9-Inch Side Zip S3 SRC Composite Toe Cap Safety Boot Kevlar Midsole Black Size 5 to 13
0₫
- Description
- Additional information
- Detail
- SIZE CHART
- Understanding the basics of a safety footwear
- The common types of outsoles constructions methods/bonding used for safety footwear
- Understanding Footwear Markings
Armour X3 features an easy on and off size zip to keep you comfortable on your feet.
• Lightweight
• Composite Toe Cap
• Kevlar Midsole for Puncture Resistance
• Scuff Cap to protect the outer material on the toecap from scuffing
• Thick perforated insole for increased comfort
• Breathable Lining
• Reflective stripes for night visibility
• Slip resistant PU/TPU sole
• 200 Joules composite toe cap protection
• Anti-Static
• Shock-Absorbing Heel
• Side zip for easy slipping on and off
• Kick Plate to protect the shoe when taking the footwear off and for easy removal
• Water Resistant
• ISO EN 20345:2011 SRC
| Price | All, $26 to $50 |
|---|---|
| Applications | Footwear |
| Size | 5, 6, 7, 8, 9, 10, 11, 12, 13 |
Detail
SIZE CHART
Understanding the basics of a safety footwear
The most common types of outsoles used for safety footwear are:
PU MONO (SINGLE) DENSITY:
It is a material with a substantial weight and a good comfort reaction. It has a good resistance to a few chemical agents and oils, but no resistance to the strong acids. The resistance to the temperatures goes from -10/-20 to +130 max 140 degrees. The softness gives a good grip to this material giving it a slip resistance similar to TPU and rubber.
Recommended usage: Indoor and not very aggressive work places.
PU/PU:
It is a double density profile sole made of PU. It has a good resistance to few chemical agents and oils, but no resistance to the strong acids. The resistance to the temperatures goes from -10/20 to 120 max 150 degrees. The dual density PU midsole provides good impact absorption and wearing lightweight comfort.
Recommended usage: Indoor and outdoor, not really for contacts with chemical agents, acids and water.
PU/TPU:
It is a particularly sturdy, abrasion-resistant and flexible. TPU provides higher performances: abrasion resistance, slip resistance at a very good level and also similar to single density PU and rubber, flexibility. On the average usage, it is more durable than PU and it has a higher resistance to low temperature from -5 up to -20 degrees. Not very resistant to high temperatures: maximum 100 degrees.
Recommended usage: Indoor and outdoor, cold weather, not really suggested for contacts with hot surfaces.
MONO DENSITY RUBBER:
Exceptionally sturdy: temperature-resistant from -30 up to 300 degrees, hard to penetrate for sharp objects and resistant to fuels, oils, microbes and numerous chemicals. However, rubber is much heavier than PU and TPU, and is less flexible when subjected to cold temperatures. The rubber outsoles are also known for the great slip resistance similar as single density PU and TPU.
Recommended usage: indoor and outdoor, in contact with oils, chemicals, acids. If HRO certified, it is also recommended for contacts with hot surfaces. It is a compact and heavy material hence it is not the best choice against foot fatigue.
Recommended usage: indoor and outdoor, cold weather, not really suggested for contacts with hot surfaces
The common types of outsoles constructions methods/bonding used for safety footwear
The common types of outsoles constructions methods/bonding used for safety footwear are:
Goodyear Welt
Using an insole with a wall or rib that is positioned closed to the edge of the insole. During lasting, the upper is secured to this wall. Sole is then positioned with adhesive to the shoe outsole and is stitched through the welt base. This is the most traditional and labour intensive with the highest price point to the end users.
Recommended usage: Typically wet and higher temperature environments, volatile environments. Such as Oil and Gas, Offshore, Oil Drilling, etc.
Cemented Bonding
In this process the upper and the sole are glued together. In this case, the sole is fabricated first, with a separate machine. Once a boot’s upper is shaped and completed, the sole is attached with an adhesive. This is the fastest method with least production time.
Recommended usage: Environments with flat surfaces, such as assembly lines, manufacturing jobs, warehouses, and roofing and service applications as well as jobs where the majority of the time is spent standing or kneeling.
Injection Molding
Injection of polyurethane, in which the sole of polyurethane is created and directly attached to the upper. The upper is placed into a mold (normally made of aluminum or Teflon), then polyurethane is injected into the mold, and when cools it becomes solid and sticks to the upper. This process fixes together the upper and the sole very firmly.
Recommended usage: Various types of working environments for the masses. Such as constructions, engineering, logistics, F&B, Service Line, Shipping, Shipbuilding, as well as jobs where the staff are numerous.
Understanding Footwear Markings
